?The Lacquer Master is cleaning thoroughly
膠模(母版)徹底清洗
?The Lacquer Master is sprayed with a solution of silver nitrate
用硝酸銀溶液噴塗膠模(母版)表面。
?Silvered Lacquer Master is mounted into plating cell
噴塗硝酸銀溶液的母版安裝在電鍍槽中
?A metal stamper is obtained after around 3 hours plating process
金屬模具電鍍製作經過大約3小時
?Stamper back side polishing
金屬模具背面拋光
?Metal stamper is peeled off from the lacquer master
從膠模(母版)上剝下金屬模具
?Centering the stamper and the machine punches a central hole in the stamper
金屬模具居中,在金屬模具上衝出一個中心孔
?Trimming the edges of the stamper in order to fit the required diameter of the final size of the record
修整金屬模具邊緣,符合要求的最終尺寸直徑
?The stamper is pre-formed to suit mold profile
金屬模具做成形以適合生產模具外形
?Pre-formed stampers are mounted into pressing mold
金屬模具安裝在壓模中
Melt plastic biscuit and two record labels are put into the mold
將熱熔的塑料和兩個標籤放入模具中
?The mold is heating up by steam and pressing with high pressure
金屬模具通過蒸汽加熱並且高壓壓制唱片成型
?The mold is opened after cooling and a vinyl record is formed
金屬模具冷卻後,打開模具並形成唱片
?The excess edge of vinyl record is trimmed off by a machine
用機器修剪唱片的多餘邊緣
?The records are being visually inspected and then packed after 24 hrs cooling
對唱片進行目視檢查,並在冷卻24小時後包裝。 |